Rain and Steam Sensor

2,99 Tax included

Use this sensor so that your inventions activate or deactivate depending on the amount of humidity detected.

The rain and steam sensor is an analog sensor. When the sensor detects a higher level of humidity, the output voltage increases.

Connect it to any of the analog ports on the 4in1 Build&Code control board. Look at the colors of the cables and the colors of the terminals on the control board to guide you. Each cable should be connected to its color.

Technical Specifications

  • Power: 3.3V or 5V
  • Output voltage signal: 0~4.5V or 0~3.0V
  • Type of interface: analog
  • Definition of the pins: S-Sigal V-VCC G-GND
  • Dimensions: 30x20x6 mm

The rain and steam sensor is an analog sensor. When the sensor detects a higher level of humidity, the output voltage increases.

Connect it to any of the analog ports on the 4in1 Build&Code control board. Look at the colors of the cables and the colors of the terminals on the control board to guide you. Each cable should be connected to its color.

Technical Specifications

  • Power: 3.3V or 5V
  • Output voltage signal: 0~4.5V or 0~3.0V
  • Type of interface: analog
  • Definition of the pins: S-Sigal V-VCC G-GND
  • Dimensions: 30x20x6 mm