Soil Moisture sensor

3,49 Tax included

SKU:BXSENSOR08

Measure the amount of soil humidity with this sensor.

The soil moisture sensor helps control the humidity level in the ground or in plants’ soil. After the measurement is taken, the sensor will give a tension proportional to the humidity that it has detected. That way, it can be known if the soil is dry, humid, or over-watered, to then program an efficient watering system.

Connect it to any of the analog ports on the 4in1 Build&Code control board. Look at the colors of the cables and the colors of the terminals on the control board to guide you. Each cable should be connected to its color.

Technical Specifications

  • Power: +3.3V / +5V DC
  • Output voltage signal: 0~4.2v
  • Current: 35 mA
  • Type of interface: analog
  • Definition of the pins: S-Sigal V-VCC G-GND
  • Fast response and high sensitivity

The soil moisture sensor helps control the humidity level in the ground or in plants’ soil. After the measurement is taken, the sensor will give a tension proportional to the humidity that it has detected. That way, it can be known if the soil is dry, humid, or over-watered, to then program an efficient watering system.

Connect it to any of the analog ports on the 4in1 Build&Code control board. Look at the colors of the cables and the colors of the terminals on the control board to guide you. Each cable should be connected to its color.

Technical Specifications

  • Power: +3.3V / +5V DC
  • Output voltage signal: 0~4.2v
  • Current: 35 mA
  • Type of interface: analog
  • Definition of the pins: S-Sigal V-VCC G-GND
  • Fast response and high sensitivity